
G1
A 1.32 m humanoid that walks, keeps its balance, waves, shakes hands and dances: for shows and events, greeting, education and research.
We listen to your needs, study your space and recommend the right solution. No commitment.
Where the G1 works
- 01
Shows and events: official certified dances, waving and handshakes
- 02
Greeting guests at exhibitions and openings
- 03
Teaching students robotics in universities and labs
- 04
Research and development on a Jetson Orin NX computer (EDU version)
The key numbers
From the officially published figures. Where no figure is published, we give none.
- Height
- 1.32m
- Weight with battery
- ≈ 35kg
- Joints (EDU)
- 29
- Knee torque (EDU)
- 120N·m
- Battery
- 9000mAh
- Runtime
- ≈ 2h
- Operating temperature
- 0–40°C
- Development computer (EDU)
- Jetson Orin NX16 GB
What to know
Space, floors, network, charging and safety. We go through all of it with you during the free consultation.
It needs an open, flat space, at least 2 m from obstacles, crowds and water.
It does not climb stairs in its current walking mode, and does not walk on ice, soft ground or gravel; on glass or tiles it goes slowly.
It is not waterproof or dustproof, and works at 0 to 40 °C only; for dry, indoor places.
A battery lasts about 2 hours and releases quickly from the side of the body, so plan long shows around it.
It moves on command from the remote or a program, always with a trained person watching, and nobody touches it while it moves.
Questions about the G1
Can the G1 hold things?
The standard rubber hand cannot grip; gripping needs the optional dexterous hand.
How fast is it?
The official manual gives a top running speed of 2 m/s in special configurations; in normal use speed is capped for safety.
Can we program it?
Yes on the EDU: your programs run on a Jetson Orin NX computer, while the built-in balance and walking program stays on the motion computer.
How does it see around it?
With a LiDAR that sees 360° around it and a depth camera in its head; it also hears and speaks.

